Buy Shure AXT631 Antenna Distribution Systems online in India – India’s music equipment superstore.

Shure AXT631 Antenna Distribution Systems.

The AXT631 Axient Antenna Distribution Amplifier delivers ultra linear amplification and precision filtering for optimal performance in even the most difficult RF environments. The AXT630 features selectable 60 MHz input filters that match the available frequency bands of Axient transmitters, providing extra protection from strong out-of-band signals and a lower overall RF noise floor. Four BNC antenna output pairs distribute filtered signal to receivers, and an unfiltered RF cascade port is included to connect wideband devices like the Axient Spectrum Manager. Networkable via Ethernet connection, the AXT631 enables WWB6 control of filtering ranges, antenna power and attenuation.

Shure AXT631 Features:

RF Optimization

• Ultra-linear distribution amp handles high signal levels without distortion.
• Selectable input filtering provides system-wide protection against strong out-of-band signals.
• Filter ranges are matched to Axient transmitter bands.
• Wideband filtering option covers multiple bands.
• Up to 15 dB selectable RF attenuation for signal-to-noise optimization.

Connectivity

• Front panel interface and WWB6 control provides easy setup and control of filtering, antenna power and attenuation.
• BNC outputs: 4 antenna output pairs.
• Unfiltered RF cascade port with selectable 3 dB make-up gain for connecting wideband devices.
• Ethernet networking: 2 PoE-enabled Ethernet ports.
• IEC in/out power ports enable daisy-chaining of AC power.

Shure AXT631 Specifications:

• Dimensions 44 mm x 483 mm x 366 mm (1.7 in. x 19.0 in. x 14.4 in.), H x W x D
• Housing Steel; Extruded aluminum
• Operating Temperature Range -18°C (0°F) to 63°C (145°F)
• Storage Temperature Range -29°C (-20°F) to 74°C (165°F)
• Power Requirements 100 to 240 V AC, 50-60 Hz
• Current Drain 1.0 A RMS (referenced at 120 V AC).

RF Input

• Connector Type BNC
• Configuration Unbalanced, active
• Impedance 50 ?
• Bias Voltage 12 V DC, 150 mA (300 mA maximum)
• RF Frequency Range AXT 630: 470–698 MHz
• AXT 631: 606–814 MHz.

Distribution Output

• Connector Type BNC (4 pairs)
• Configuration Unbalanced, active
• Impedance 50 ?
• Gain Adjustment Range Cascade Enabled: -15 dB to 0 dB (In 1 dB steps)
• Cascade Disabled: -12 dB to +3 dB (In 1 dB steps)
• Output Intercept Point >25 dBm, typical.

Cascade Output

• Connector Type BNC (1 pair)
• Configuration Unbalanced, wideband
• Impedance 50 ?
• Insertion Loss

Networking

• Power Over Ethernet (PoE) 50 V DC, Class 1
• Network Interface Dual Port Ethernet 10/100 Mbps
• Network Addressing Capability DHCP or Manual IP address.

Made in China