Vault C6 6″ Powered Studio Monitors With Isolation Foam Pads – Pair

- 70 % Off

$5,699.70

Vault C6 6″ Powered Studio Monitors With Isolation Foam Pads – Pair

Description

#Pair

 

Vault C6 6-Inch Powered Studio Monitors with Isolation Pads – Pair

All Vault products come with 3 years standard warranty**Warranty is not applicable on cables and accessories.


Vault C6 6 Inch Active Professional Studio Monitor Speakers

 

The Vault Monitors are designed and tested by audio engineers to meet your needs in a studio monitoring environment. It is focused on the functional goal of delivering pure, original sound without any additional colouration regardless of the genre of music you listen to. They are self-powered, directly accepting a line-level signal from a variety of sources. Vault Monitors deliver a wide-range frequency response and use a unique crossover technology for a stable and balanced low-mid frequency response along with a defined mid and high-frequency range. For professional engineers at commercial studios to home studio owners, Vault Near-Field Monitors, set a whole new affordable standard in studio monitoring market.

Compare Vault C6 Powered Studio Monitors Spec for Spec vs. Other Bestsellers

 

Model Vault C6 M-Audio BX6 Carbon KRK RP6 RoKit G3
Price per Pair. ₹16,499/- ₹27,800/- ₹ 36,999/-
Warranty 3 Years 1 Year 1 Year
Speaker Size 6″ 6″ 6″
Tweeter Size 1.25″ Shielded 1.25″ Silk Dome 1″ Soft dome tweeter
Frequency Range 45-22Khz 45-22Khz 38-35Khz
Power Output 65 Watts 70 Watts 73 Watts
Bass Reflex Port Rear Rear Front
Magnetic Shielding X
Manual Frequency Correction
Auto Standby Function X X

Kevlar driver

Vault C series monitors, Low-frequency drivers are made out of Kevlar which allows the speaker drivers to perform under pressure. Kevlar gives you that tight sound you seek in studio monitors.

 

 


Silk dome tweeter

The silk dome tweeters take care of reproducing high and upper-mid frequencies (treble) for the monitors, giving you crisp and clear high-frequency sound, making your music sound exceptionally good.

 

 


Acoustic room switch

The rear panel houses an acoustic room switch which allows you to tune your speakers to your room. If your setup is in a smaller space and the sound gets boomy, flip the switch to -4db and enjoy good quality sound minus the extra room resonance.

 

 


Multiple Input connections

C series monitors allow you to connect either an XLR input source or a line level source, choose from either to connect it to various output devices.

 

 

 

 


Free Acoustic Foam pads

Inside the box get a pair of acoustic foam pads to reduce vibrations produced by the speaker after kept on your desk. Place one monitor on each pad to enjoy clean music without any extra furniture vibrations.

 

 

In the box

    • One pair of C6 Monitors
    • Power cable
    • Acoustic Foam pads for speaker isolation
    • User manual

#BUNDLE

Vault C6 6-Inch Powered Studio Monitors with Isolation Pads, Cables, and Ebook  – Pair

All Vault products come with 3 years standard warranty**Warranty is not applicable on cables and accessories.


Vault C6 6 Inch Active Professional Studio Monitor Speakers

The Bundle Includes all the essentials the user needs for optimal speaker performance, right out of the box.

It includes :

  • Vault C6 Active Studio Monitor Speakers – Pair
  • Monitor Isolation Pads- to eliminate vibrational hum off your desk surface, providing improved clarity and bass response (place speakers on pads)
  • Bajaao Ebook guide for Studio Essentials
  • Bajaao 3-meter, Standard 1/4 TRS cables, – to connect your speakers to audio interface or any audio output – Pair
  • 3 Year Bajaao Manufacturer’s Warranty Support

The Vault Monitors are designed and tested by audio engineers to meet your needs in a studio monitoring environment. It is focused on the functional goal of delivering pure, original sound without any additional colouration regardless of the genre of music you listen to. They are self-powered, directly accepting a line-level signal from a variety of sources. Vault Monitors deliver a wide-range frequency response and use a unique crossover technology for a stable and balanced low-mid frequency response along with a defined mid and high-frequency range. For professional engineers at commercial studios to home studio owners, Vault Near-Field Monitors, set a whole new affordable standard in studio monitoring market.

Compare Vault C6 Powered Studio Monitors Spec for Spec vs. Other Bestsellers

 

Model Vault C6 M-Audio BX6 Carbon KRK RP6 RoKit G3
Price per Pair. ₹16,499/- ₹27,800/- ₹ 36,999/-
Warranty 3 Years 1 Year 1 Year
Speaker Size 6″ 6″ 6″
Tweeter Size 1.25″ Shielded 1.25″ Silk Dome 1″ Soft dome tweeter
Frequency Range 45-22Khz 45-22Khz 38-35Khz
Power Output 65 Watts 70 Watts 73 Watts
Bass Reflex Port Rear Rear Front
Magnetic Shielding X
Manual Frequency Correction
Auto Standby Function X X

Kevlar driver

Vault C series monitors, Low-frequency drivers are made out of Kevlar which allows the speaker drivers to perform under pressure. Kevlar gives you that tight sound you seek in studio monitors.

 

 


Silk dome tweeter

The silk dome tweeters take care of reproducing high and upper-mid frequencies (treble) for the monitors, giving you crisp and clear high-frequency sound, making your music sound exceptionally good.

 

 


Acoustic room switch

The rear panel houses an acoustic room switch which allows you to tune your speakers to your room. If your setup is in a smaller space and the sound gets boomy, flip the switch to -4db and enjoy good quality sound minus the extra room resonance.

 

 


Multiple Input connections

C series monitors allow you to connect either an XLR input source or a line level source, choose from either to connect it to various output devices.

 

 

 

 


Free Acoustic Foam pads

Inside the box get a pair of acoustic foam pads to reduce vibrations produced by the speaker after kept on your desk. Place one monitor on each pad to enjoy clean music without any extra furniture vibrations.

 

 

In the box

  • One pair of C6 Monitors
  • Power cable
  • Acoustic Foam pads for speaker isolation
  • User manual

The bundle includes the following components : 

Acoustic Isolation pad for Monitor Speakers 

The bundle includes an acoustic foam pad to minimize the vibrations and buzz while placed on any surface. This is a crucial element to stabilizing your studio or your initial set-up, once established the monitors remain intact throughout louder listening sessions.

3 Year Bajaao Manufacturer’s Warranty

The product is covered by a 3-Year Bajaao Manufacturer’s Warranty Card ensuring safety & dedicated support to the user.

Bajaao E-book for Studio Essentials

The bundle includes an Ebook which will include basics of home/studio setup. Building a home recording studio takes months of planning, research, andpreparation. Getting started is far easier than you might imagine. All you need is afew basic essentials.

Bajaao Standard 1/4 Jack TRS cables – 3 Meter – Pair

The Bajaao Standard Instrument Cable Straight to Straight uses Ultra High Clarity Plugs – the conductor is soldered directly to the tip with silver solder to maximize signal flow, a 99.9% pure copper low strand count conductor, 23 pF/ft low capacitance, and a 93% spiral shield for excellent RF rejection. This cable was designed for rugged stage use and to provide superior performance at a bargain price, with better sonic characteristics and performance than all instrument cables in its class.

 

#WithControl1

Vault C6 Powered Studio Monitors With Control 1 Passive Studio Monitor Controller, Isolation Pads & 2xSpeaker Cable

All Vault products come with 3 years standard warranty**Warranty is not applicable on cables and accessories.


Vault Powered Studio Monitors Speakers


The Vault Monitors are designed and tested by audio engineers to meet your needs in a studio monitoring environment. It is focused on the functional goal of delivering pure, original sound without any additional colouration regardless of the genre of music you listen to. They are self-powered, directly accepting a line-level signal from a variety of sources. Vault Monitors deliver a wide-range frequency response and use a unique crossover technology for a stable and balanced low-mid frequency response along with a defined mid and high-frequency range. For professional engineers at commercial studios to home studio owners, Vault Near-Field Monitors, set a whole new affordable standard in studio monitoring market.

Kevlar driver

Vault C series monitors, Low-frequency drivers are made out of Kevlar which allows the speaker drivers to perform under pressure. Kevlar gives you that tight sound you seek in studio monitors.

 

 


Silk dome tweeter

The silk dome tweeters take care of reproducing high and upper-mid frequencies (treble) for the monitors, giving you crisp and clear high-frequency sound, making your music sound exceptionally good.

 

 


Acoustic room switch

The rear panel houses an acoustic room switch which allows you to tune your speakers to your room. If your setup is in a smaller space and the sound gets boomy, flip the switch to -4db and enjoy good quality sound minus the extra room resonance.

 

 


Multiple Input connections

C series monitors allow you to connect either an XLR input source or a line level source, choose from either to connect it to various output devices.

 

 

 

 


Free Acoustic Foam pads

Inside the box get a pair of acoustic foam pads to reduce vibrations produced by the speaker after kept on your desk. Place one monitor on each pad to enjoy clean music without any extra furniture vibrations.

 

 

Vault Control 1 Passive Studio Monitor Controller Overview:

The Vault CONTROL-1 is a miniature console to control the level of your computer’s audio to powered monitor speakers. Featuring all passive circuitry with an uncluttered signal path to avoid coloration the unit simply connects between your desktop computer, laptop or audio interface and loudspeakers.

Video Showing Unboxing for the Vault Control 1!

Have a complete look at Control 1!

Combo sockets enable balanced input on XLR or 6.35 mm TRS connectors, the L/R stereo output is onXLR connectors. The CONTROL-1 also provides unbalanced 3.5 mm stereo input and output to accomodate consumer equipment.For additional convenience, the unit incorporates an output mute switch and a mono switch to sum the left and right stereo channels.With sides of solid wood, a powder coated steel enclosure and non-slip rubber feet the CONTROL-1 is a highly useful tool in the studio and at home… and it’s an eyecatcher, too!CONNECTING AN AUDIO INTERFACEIf your audio interface provides XLR or 6.35 mm TRS outputs use high quality shielded patch or microphone cables for balanced connection to the CONTROL-1 ’s L/R combo inputs.NOTE: TO PREVENT POPS AND CRACKLING NOISES MAKE SURE YOUR MONITOR SPEAKERS ARE SWITCHED OFF BEFORE CONNECTING THE CONTROL-1.•Connect the L/R outputs of your interface to the CONTROL-1 L/R inputs.•Connect the CONTROL-1 L/R outputs to your monitors.•Set your computer’s audio output level to maximum and your software master volume to 0 dB.•Set the C0NTR0L-1’s attenuation control fully counterclockwise.•Switch on your monitors.•Make sure the C0NTR0L-1’s mute function is deactivated and bring up the volume by rotating the attenuation control clockwise.Stereo inputs:L/R combo sockets for balanced XLR or 6.35 mm TRS input plus 3.5 mm TRS jack. To prevent ground loops do not use the combo sockets and 3.5 mm jack simultaneously.Stereo outputs:L/R XLR sockets plus 3.5 mm TRS jack. To prevent ground loops do not use the XLR sockets and 3.5 mm jack simultaneously.Mono:Pressing this switch feeds a mono sum of the left and right stereo channels to all outputs.Pressing this switch mutes all outputs.Attenuation:This knob controls the output level to your monitor speakers.Specifications:

    • Product Type: monitor controller passive
    • Type: Passive
    • Number of Input: 2
    • Number of Channels: 2
    • Inpu Connections: XLR-TRS combo/3.5 mm stereo TRS
    • Input Type: balanced / unbalanced
    • Maximum Input Level: +20 dBu
    • Input impedance: 10k balanced /5k unbalanced
    • Number of Input: 2
    • Output connections: XLR/m, 3.5 mm stereo TRS
    • Output Type: Balanced / unbalanced
    • Max Output: +20 dBu
    • Output impedance: 600 ohms
    • Frequency response: 10 Hz – 40 kHz +/-1dB
    • THD: 0,001%
    • Max. attenuation: 85 dB (attenuator) 112 db (attenuator + mute)
    • Control: Attenuation, Mute, Mono
    • Housing material: Sheet steel / genuine solid wood
    • Housing Surface: powder-coated
    • Dimensions: 164 mm x 85 mm x 62 mm
    • Weight: 690 g

Bajaao TS to XLR Male Speaker Cable – 3 Meter – Pair

Made in China

Additional information

Type

Pair, BUNDLE, WithControl1

Vault C6 6" Powered Studio Monitors With Isolation Foam Pads - Pair

Add to cart